FREE SHIPPING on orders over $200 within USA

What is ReBuilder?

What is ReBuilder?

ReBuilder is a very sophisticated neuro-electric device registered by the FDA as a specialty medical device. It is used in diabetes, cancer clinics, chiropractic, and physiotherapy centers worldwide. It is very effective on all kinds of neuropathy, whether you suffer from peripheral neuropathy, diabetic neuropathy, polyneuropathy, or any other neuropathy.

reverse neuropathy with rebuilder

How does ReBuilder work?

It has a built-in microprocessor that measures physiological functions on the nerves. It adjusts automatically to the patient’s specific needs.

It turns the device on and sets the output parameters for the treatment according to the patient’s physical mass. The device detects if it is being used on either hands or feet and develops the strength and frequency of the impulses it should send out. No other electronic device can offer a safety level comparable to this.

It uses a patented wave form to reconstruct or repair the nerves.

rebuilder waveform

It sends out impulses 7.83 times per second to stimulate them softly. These signals are an exact copy of a healthy nervous waveform to reestablish normal nerve function, strengthen the muscles and restore local blood flow.

The signal or impulse sent out by the ReBuilder creates a closed circuit on the lower or upper limbs to treat both nerves and muscles in the body, to reeducate, renew, and strengthen them.

Calms down hypersensitive nerves and stimulates hypoactive or numb nerves.

rebuilder calms the nerves

ReBuilder does not block nerves; it opens up nervous pathways and corrects them so they can start working correctly again. Also, it relaxes the patient so he can sleep at night without the annoying symptoms caused by neuropathy.

By treating neuropathy with ReBuilder, you get a dramatic reduction of pain. In most cases, you will be able to revert it completely.

Automatic bio-feedback system integrated

ReBuilder sends a “test” signal representing a standard waveform from a healthy peripheral nerve. This signal starts in one foot, goes up the leg to the nerve roots in the back, and then goes down the other leg until reaching the other foot. Then it waits for an echolike response to the first signal it sent.

Normal Peripheral Nerve Waveform

normal waveform

Nerve state automatic revision

ReBuilder analyzes the signal it receives in a fraction of a second and detects nerve dysfunction. So, just as a cardiologist can examine an electrocardiogram result from his patient and diagnose if something is wrong with his heart, we now know that peripheral nerves have a particular shape. So, if it is analyzed, we can determine the nature of the problem.

Abnormal Peripheral Nerve Waveform

abnormal waveform

Automatic Adjustment 7.83 times per second

ReBuilder then creates a waveform to compensate for the nervous dysfunction it detected. For example, ReBuilder adapts its therapeutic waveform to reduce this energy in areas with too much energy. Conversely, when the waveform indicates low power, ReBuilder increases the point in that area. This process takes place 7.83 times per second, sending signals, analyzing the return signal, and creating a new compensatory signal.

Abnormal Waveform overlaid by
ReBuilder® Therapeutic Waveform

rebuilder therapeutic waveform

ReBuilder’s healthy and therapeutic signals are focused on the following:

  • Reeducating nervous pathways.
  • Repolarizing nervous membranes.
  • Reestablishing nervous impulse transmission.
  • Increasing blood circulation.

With ReBuilder treatment, nerve repolarization is produced, and we can manage to reeducate them so they can follow the correct route. Nerves are stimulated so their nervous impulses can jump over the synaptic union and reestablish a connection promoting new neuron growth, new relationships, and gradual myelin regeneration. We can also restore blood circulation to give back sensitivity to the limbs.

Also, when treating neuropathy with ReBuilder, you will be able to sleep better, reduce stress and increase the mobility and flexibility of the treated limbs.

rebuilder is the solution for neuropathy

ReBuilder® has proven to be very practical, mainly in the treatment of the following ailments:

  • Diabetic Neuropathy
  • Peripheral Neuropathy
  • Chronic inflammatory demyelinating polyneuropathy (CIDP)
  • Post-Herpetic Neuralgia (Herpes Zoster)
  • Carpal tunnel syndrome
  • Sciatica
  • Injuries to the Spine
  • Post-Polio
  • Lymphedema/Inflammation
  • Parkinson’s disease
  • Multiple Sclerosis (ME)
  • Muscular Dystrophy (MD)
  • Arthritis
  • Fibromyalgia
  • Physical injuries
  • Brain-Vascular Accidents (strokes)
  • Side effects due to chemotherapy
  • Trauma or injury from surgeries such as amputations and many more.

ReBuilder alleviates pain and numbness in a permanent way.
It does all this without drugs or invasive surgery!

ReBuilder Use

Using ReBuilder is pretty simple. However, different application methods will depend on the patient’s symptoms and comfort level during the treatment session.

use of rebuilder with electrodes

Electrodes or adhesive pads

ReBuilder usually comes with adhesive pads. Place them on the soles of your feet or the palms of your hands. Then, sit down and turn on the device for a 30-minute treatment.

ReBuilder will adjust its frequency 7.83 times per second to adapt to your body, considering your unique biology.

You can also use other accessories to send out ReBuilder’s signal, such as annular electrodes, conductive gloves, socks, and foot pads.

Annular Electrodes

You can use the annular electrode (adjustable straps) to treat areas such as ankles, knees, thighs, wrists, elbows, hips, and waist.

These electrodes complement the potency of the the7.83Hz frequency and make the ReBuilder signal work more directly over the areas on which they are located.

use of rebuilder with annular electrodes
use of rebuilder with gloves and conductive socks

Conductive Gloves and Socks

Use conductive gloves or socks to better effect over fingers or toes.

It is recommended that you dampen these garments with the electrolyte solution that comes with the accessories to improve ReBuilder’s signal conductivity.

Put on the gloves or socks and connect the cables, then turn on the ReBuilder.

FootPads

FootPads are the simplest way to perform a treatment session with ReBuilder.

Place them on the floor, spray them with the electrolyte solution, place your feet on top and turn on the ReBuilder.

You can also treat your hands with the pads.

Dampen the pads with the electrolyte solution and place the tips of all five fingers on each pad.

use of rebuilder with footpads

Use ReBuilder daily!

30 minutes, twice a day during the first 2 months,

then one or two days a week,

after this you can use ReBuilder when you deem necessary.

You've just added this product to the cart: